|
The harvester is for gooseberry, black and red current:
The recommended speed is about 0,6-1,5 km/h and depends mainly on the yields size. Harvest efficiency is about 0,1-0,2 ha/h and it highly depends on the way that fruits are being unloaded.The harvester takes during one pass harvests fruit from one side in a row. It should be driven by an agricultural tractor with min. power of 20 kW
Also its functionality and reliability has increased. The most important thing for us was to improve the quality of the set gooseberry and new varieties of low fruitful currants. We also have consider the remarks of similar machines users. We do our best to make our harvesters be high quality, simple in use and easy to service.
The drive of the harvester is fully hydraulic. The construction of the harvester permits installation of one or two shakers and the client decides how many strewers is installed. It is important that the majority of our customers chooses the version with two shakers. It is possible to use one shaker version to collect many varietes of blackcurrants. But, it is much better to use two shakers version to collect red currants, gooseberries. In that case, fruits are collected more exactly and the bushes are damaged less.
The precision of the harvest depends on the size of the bushes and way of the cultivated area. In good conditions the precision is almost 99% and there is no more than 1% damaged fruits there.
The frequency of strewers’ vibrations, the speed of conveyors and the efficiency of a cleaning fan are regulated fluently by hydraulic valves. To provide a fluent harvest from heavily fruiting plantations the linear speed of conveyors and the capacity of containers on the conveyor’s belt were increased.
Basic version is harvested is equipped in tri-gradual gap regulation. Combined with a large variety of distributor‘s elements regulation and the ability to lower
heavily the shakers elements it allows harvesting from both low and high bushes. No additional elements are necessary to achieve that.
Relatively high location of conveyor’s container facilitates the collection of fruit cases and allows adjusting the machine to harvest into bins.
Additional information about bin harvesting can be found in the additional accessories section.
Plantation requirements:
A plantation should be flat and even (max. slope 5%), cleared from stones, with no furrows and hollows. A space of minimum 8 meters to turn round the harvester should be provided on both sides. When using harvesters with steered wheels the space can be reduced to 4-6 meters. The span of the rows should be minimum 4 meters and the span of the bushes in a row maximum 0,5 meters. The bushes should be formed into a letter V, without crossing shoots.
  
|
Technical Datas:
(basic version, collecting to boxes)
- Transport length: 4,80 m
- Working length: 5,80 m
- Width: 2,25 m
- Height: 1,96 m
- Weight: 1500 kg
- Performance: 0,1-0,2 ha/h
Hier können Sie ein Vidio sehen
You can see here a movie
Optionals:
Hydraulic steering:
Hydraulically steered wheels significantly improve the responsiveness of the tractor-harvester set. It allows a quick correction of the harvester’s position in accordance with bushes. It is also easier to move the harvester from one row into another. The wheels are exceptionally useful on slops when the harvester needs to be constantly moved closer to the bushes when going one side and moved away when going the opposite way.
The wheels are steered by an exterior hydraulic of the tractor. They are steered by the driver or, in another solution, an operator situated on the harvester’s platform. The manner of steering must be precised when ordering the harvester. There is a wheel position indicator placed on the arm of the harvester to facilitate the steering.
Bin harvesting equipment:
We set a bin on the forks and when it’s full we stop the conveyor, lower the forks and move the harvester. When the pallet slips off we move the forks up again, set another empty pallet on them and start the conveyor again.
|
